X41 Transmitter
IN
DIGITAL
OUT
L
LINE IN
R
LINE IN
VOLUME
DC 5V
+
-
POWER
REAR VIEW
DIGITAL
INPUT
PL II
D
BYPASS
FRONT VIEW
Digital Input and Output: Connect the digital input (top) to the XBOX 360 digital output using the included digital optical cable. The digital input (top) is passed through to the digital output (bottom) so you can connect the X41 transmitter and your home theater system to hear the XBOX on the headset and speakers at the same time. When the XBOX digital signal is active, the analog inputs (2) are disabled.
Line In (stereo analog inputs): Use these inputs to connect analog audio sources, such as a TV, MP3 Player, etc. If the Bypass (9) is turned off, the analog stereo signal will be processed by the Dolby Pro Logic IIx decoder, producing an expanded stereo effect.
Line In Volume: Sets the sensitivity of the analog inputs to accept a wide range of input levels. This control has no effect on the digital input signal level. Typically, this should be set to maximum and the headset volume used to adjust the listening level. If the sound distorts, turn down the Line In volume (3) to prevent overloading the analog inputs.
Power Socket: Insert the included X41 power cable into this socket. Insert the other side of the cable into a free USB port on the XBOX console or nearby PC or laptop.
Power Switch: Push to turn on the transmitter power.
Power/Link Indicator LED: When the transmitter is powered on and communicating with the headset, this LED will be on solid. If this LED is slowly pulsing, it means the transmitter can’t communicate with the headset. This could happen when the headset is turned off or out of range.
Digital Input Indicator LED: This LED turns on when a digital input signal is detected. When this LED is on, the analog inputs are turned off.
Dolby Processing Indicator LEDs: The 
LED will light whenever the digital or analog input is being processed by the Dolby Pro Logic IIx decoder. The 
D LED will light whenever the digital input signal is being processed by the Dolby Digital surround sound decoder. Both LEDs will turn off when the Bypass is ON.
Bypass Button and Indicator LED: Pressing this button turns off the Dolby processing, allowing you to hear the unmodified input signal in stereo. The LED will turn on when Bypass is active and Dolby Processing is disabled.
Wired Headphone Volume Control and Output Jack: Insert a pair of optional wired headphones into this jack to hear the same signal as the wireless headset. This may be used as a second set of headphones so two people can hear the game. The volume control does not affect the wireless headset.
Page 3
