X41 Headset and Talkback Cable
LEFT EAR CUP
Power Switch: Turn on the headset by pressing the power switch (1) for a couple of seconds, then release. The power LED (5) should start flashing. Turn off by pressing the button (1) until the LED (5) stays on, then release.
POWER
ON - BASSEFFECTSBOOST - OFF 
XBOX Controller Jack: Insert the straight connector on the talkback cable (see below) here.
Effects Button: Press this button to activate the bass boost effect. A high pitched beep indicates that bass boost is on. Press again and a low pitched beep indicates that it’s turned off.
Game Volume: Turn to adjust the game sound level. The XBOX LIVE chat volume may be independently set by the volume control on the talkback cable.
MICROPHONE
Markers on the jack indicate the proper position when the foam cover is on the mic
Remove the foam cover and insert the mic boom so the holes in the mic casing are facing your mouth. Then replace the foam cover.
Power LED: Flashes about once per second when power is on. To con- serve batteries, the headset will turn off after several minutes if there’s no sound or if the transmitter is turned off. In this case, the LED on the left ear cup will flash faster to indicate that it will soon shut off.
Microphone socket: Insert the re- movable mic boom here. The socket is notched to prevent the boom from rotating after insertion.
To properly position the mic,
remove the foam cover, insert the boom into the socket (6) so the holes on the mic casing (7) are facing your mouth. Then replace the foam cover. The boom jack also has a marker to indicate the proper mic position.
Page 5
