TVS electronic RP-35 4. User Switches

Paper Feed button : Pressing the PF button momentarily will advance the paper one character line and

pressing it continuously will cause a fast feed at 15 lines per second.

A Power switch located on the lower left side of the printer is used to turn the printer on/off.

This section explains the different patterns signaled by the two LED indicators located on the top cover

of the Jus' Bill RP-35.

STATUS LED1 LED2 LED3 REMARKS

GREEN RED RED

Power Off OFF OFF OFF Normal power is not supplied to the printer

Power On Flash ON ON Normal power is supplied to the printer

On line ON OFF OFF Normal error-free mode

Paper low ON OFF ON Insert new paper roll

Cover open ON Flash OFF Close cover

Paper empty ON Flash OFF Insert new paper roll

Paper jam ON OFF OFF Impossible to recover

OFF ON

Test mode ON ON OFF Ignored Paper Low

4. User Switches