Indicator Display
This unit displays operational states using different combination of indicators.
●Please refer to page 35 for explanations on warning indication for *2.
●Please refer to page 41 for indications when an abnormality occurs in this unit.
Indicator Display on the Top Surface
|
| Indicator |
|
|
| Description | |
|
|
|
|
|
|
| |
STAND BY | OPERATE | LAMP |
| TEMP | FAN | HIDE | |
|
| ||||||
|
|
|
|
|
|
|
|
Light On | ^ | ^ |
| ^ | ^ | ^ | Unit is in standby mode |
|
|
|
|
|
|
|
|
^ | Light On | ^ |
| ^ | ^ | ^ | Unit is in operate mode (during projection) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| When the video image is temporarily cleared |
^ | Light On | ^ |
| ^ | ^ | Light On | upon pressing the [HIDE] button during |
|
|
|
|
|
|
| projection |
|
|
|
|
|
|
|
|
Blinking | ^ | ^ |
| ^ | ^ | ^ | *1 Unit is in cool down mode |
| (when cooling lamp) | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
^ | ^ | Light On |
| Blinking | ^ | ^ | *2 About time to replace lamp |
| (Lamp usage time has exceeded 1900 hours) | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
^ | ^ | Light On |
| ^ | Blinking | ^ | *2 Lamp life has expired |
| (Lamp usage time has exceeded 2000 hours) | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| *2 When unit is forced to switch to cool down |
^ | ^ | Light On |
| Blinking | Blinking | ^ | mode |
| Time to replace lamp | ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| (Lamp usage time has exceeded 2010 hours) |
|
|
|
|
|
|
|
|
Indicator Display on the Control Panel
Indicator |
|
| Description | |
|
|
|
| |
Rx |
| Tx |
| |
|
|
| ||
|
|
|
| |
Light On |
| ^ | When this unit is receiving | |
|
|
|
| |
^ |
| Light On | When this unit is sending | |
|
|
|
|
|
*1 About Cool Down Mode |
|
| CAUTION: | |
After projection, the heated lamp will go through a 60- | When in the cool down mode, do not pull out the plug | |||
second | from the power outlet. Also, do not block the air inlets/ | |||
mode. This function is to prevent damage and |
| exhaust vents by standing this unit on its end or laying it | ||
deformation that heat from the heated lamp may cause | on its side. | |||
to the internal components of this unit. It also prevents lamp breakage and shortened lamp life.
The cool down mode is indicated by the blinking [STAND BY] indicator. When in the cool down mode, the [OPERATE ON] button will be disabled.
After the cool down process is completed, the unit will automatically switch to the standby mode.
ENGLISH
15
