JVC DLA-HD10KSU/E, DLA-HD10KU/E manual Menu Configuration

Menu Configuration

A Image Adjust Menu

To adjust images.

................................................................................................

Gamma

Switches the gradation characteristics of the image. Select your preference setting values according to the image to be viewed.

Setting Values: ANormalB,AAB,ABB,ACustomB

Default Value: ANormalB

NOTE:

Setting to ACustomB enables you to set (adjust) to a gamma value of your preference via the computer that is connected to the projector by using a Gamma adjustment software. (Default picture quality is equivalent to ANormalB)

You can download the Gamma adjustment software from the following website.

http://www.jvc-victor.co.jp/

................................................................................................

Color Temp.

Adjusts the color temperature of the projected image. Setting Values: AD65B,AUser1B,AUser2B

Default Value: AD65B

Red,Green,Blue

Setting Values: -255 to 0

Default Value: A0B

●When you set the AColor Temp.B setting to AUser1B or

AUser2B, adjustment of ARed,Green,BlueB can be done.

................................................................................................

Test Pattern

Use this to adjust focus, screen size or picture quality. There are 10 types of test patterns. Press the [ENTER] or [TEST] button to alter the test pattern to be projected. Press the [EXIT] button twice to clear the test pattern.

................................................................................................

Pixel Adjust

Fine-tunes the image position in the horizontal/vertical directions.

●This is not required under normal circumstances.

H Pixel Adjust

ARedB,AGreenB,ABlueB

Setting Values: 1 to 7

Default Value: A4B

V Pixel Adjust

ARedB,AGreenB,ABlueB

Setting Values: 1 to 7

Default Value: A4B

NOTE:

AH/V Pixel AdjustB allows fine-tuning of images in the horizontal/vertical directions up to ±3 pixels at intervals of 1 pixel for each of Red, Green and Blue. Make use of a still image with a clear outline during adjustment. This feature is intended for fine-tuning of images and therefore the effect upon adjustment may not be visible to the eye.

B Setup Menu

................................................................................................

Menu Position

Adjusts the display position of the menu screen. Setting Values:

Default Value:

................................................................................................

Mask

Masks (Hides) the outer area of the projected image. Setting Values: A2.5%B,A5%B,AOffB

Default Value: AOffB

................................................................................................

Flip H

Reverses image to the left or right.

Setting Values: AOnB,AOffB

Default Value: AOffB

................................................................................................

Flip V

Inverts image upside down.

Setting Values: AOnB,AOffB

Default Value: AOffB

................................................................................................

Picture Shift

When projecting images with black bands at the top and bottom (cinema image), use this to move the image up or down while retaining one of the black bands at the upper or lower end.

Setting Values: -30 to 30

Default Value: A0B

ENGLISH

31