JVC DLA-HD10KU/E, DLA-HD10KSU/E manual Adjustments and Settings Using Menus continued

Adjustments and Settings Using Menus (continued)

C Options Menu

................................................................................................

Menu Display

Adjusts the display duration of the menu screen. Setting Values: A15secB,AOnB

Default Value: A15secB

●The menu screen display will not disappear automatically when this is set to AOnB. Press the [EXIT] button to clear the menu screen.

................................................................................................

Sleep Time

Sets the lapse time before automatically switching the unit to the standby mode when there is no signal input.

Setting Values: A15minB,A30minB,A60minB,AOffB

Default Value: AOffB

................................................................................................

RC232C (bps)

Sets the communication speed (signal transmission speed) when communicating with a computer using the RS-232C terminal. Ensure that this is same as the rate set at the computer.

Setting Values: A9600B,A19200B

Default Value: A19200B

................................................................................................

Zoom/Focus

Locks/Unlocks the power zoom/power focus functions of the projection lens.

Setting Values: ALockB,AUnlockB

Default Value: AUnlockB

................................................................................................

Power Save

Switches the power (brightness) of the light-source lamp. Setting Values: AOnB,AOffB

Default Value: AOffB

●It is possible to lower the power (brightness) of the light- source lamp when this is set to AOnB, but the display will appear darker than when this is set to AOffB.

●Adjustment of settings will be disabled for about 1 minute after the setting is changed. In this case, adjust settings after a lapse of at least 1 minute.

●Altering the AOnB,AOffB setting does not affect the lamp usage time (lamp life) of the light-source lamp.

D Information Menu

................................................................................................

Lamp Time

Displays the accumulated hours of usage of the light- source lamp.

................................................................................................

Source

Automatically identifies the input video signal at the [DVI] terminal of this unit and displays the signal name (A1080p50B or A1080p60B).

●When there is no video signal input to the [DVI] terminal, or when there is input of a video signal that cannot be used with this unit, no signal name will be displayed.

NOTES:

●When the input video signal is switched, a blue back image will appear for about 2 seconds.

●When nothing is connected to the [DVI] terminal, or if there is no video signal, a ANo Signal DVI-DBmessage will be projected.

●For a video signal that cannot be used with this unit, a AOut of RangeB message will be projected.

●Video input signals that can be used with this unit are 1080/50p and 1080/60p signals by DVI-D.

32