JVC DLA-HD10KU/E manual D Ef G H, B C A, Controls and Features continued, Rear Side/Right Side

Controls and Features (continued)

Rear Side/Right Side

D EF G H

SCREEN TRIGGER SERVICE RS-232C DVI

Removing the control panel cover

Release

Lock

B

C

A

A Control Panel Cover E SCREEN TRIGGER Terminal

Remove this cover when operating this unit or when replacing the lamp unit.

●Unlock the cover, followed by sliding it downwards to remove it.

●Please refer to page 13 for details on the control panel.

Handling the Control Panel Cover

●The gap between this unit and the control panel cover is narrow. Be careful not to stick your finger into the gap between this unit and the control panel cover.

●Be careful of the protrusions and corners of components to avoid injury.

●After attaching the control panel cover, check that the lock is fastened. The control panel cover may drop and cause injury.

This terminal is used for controlling the SCREEN TRIGGER-compatible elevating screen. An output at DC +12 V/100 mA (max.) is produced when the power is on.

●Consult a qualified technician for a connection with the screen.

F [SERVICE] Terminal

This terminal is intended for servicing purposes. Do not use it. Using it may give rise to error and malfunction of the unit.

G [RS-232C] Terminal (D-sub 9 Pin)

This is the RS-232C interface-specific terminal. This unit can be controlled by a computer connected externally. (A Pages 24, 45)

●For details, please check with your authorized dealer.

B Exhaust Vent

Warm air is expelled through this vent to keep the system cool. Do not block the exhaust vents. This may cause the unit to malfunction.

C AC Power Input Terminal

This is the AC power input terminal. Connect the supplied cord to this terminal. (A Page 25)

D Remote Sensor (Rear)

When operating with the remote control, aim it towards the sensor. (A Page 23)

●A remote sensor is also located at the front of the unit.

H [DVI] Terminal (DVI-D 24 Pin)

This is an input terminal for video signals. Video signals that can be input are 1080/50p and 1080/60p signals. (A Page 24)

12