JVC DLA-HD10KU/E, DLA-HD10KSU/E manual Basic Operation Procedures, b - B, a Removing the lens cap

Basic Operation Procedures

If setting for this unit is not completed, please refer to AAdjustments and Settings Using MenusB (A Page 28) upon turning on the power and perform the required setting accordingly. Once the basic setting is completed, this unit can be used by simply performing the following operation procedures.

b - B

ON OPERATE OFF

CHP LIGHT TEST

MENUEXIT

ENTER

PRESETHIDE

aRemoving the lens cap

● Upon using, mount the lens cap to prevent soiling of the lens.

bTurning on the power

A Insert the power plug to the power outlet

●The main power turns on and the [STAND BY] indicator on the unit lights up.

T

ZOOMFOCUS

W

c

STAND BY

OPERATE

LAMP

Light On

Indicator

a

Indicators on this unit

B Press the [OPERATE ON] button for 1 second or more

●The [OPERATE] indicator on this unit lights up and the projected image slowly appears.

STAND BY
OPERATE	Light On
LAMP

RS232C Rx Tx

MENU

T	+
ZOOM	FOCUS
W	-

OPERATE

EXIT ON

b - B

OPERATE

OFF

HIDE

c

Indicators on this unit

NOTES:

●Upon projection, the image may flicker for a few seconds. This is not a malfunction.

●When the light source is turned on, the lamp will slowly become brighter. It will take more than 1 minute for the brightness to stabilize.

cAdjusting zoom (screen size)

To enlarge the screen size, press the [ZOOM T] button To reduce the screen size, press the [ZOOM W] button

NOTES:

●To adjust zoom and focus, set AZoom/FocusB in the AOptionsB menu to AUnlockB (default setting: AUnlockB).

●When this is set to ALockB, a Anot availableB message will be displayed upon pressing the [ZOOM T/W] or [FOCUS +/-] button, indicating that the operation is disabled.

26