49
This setting allows you to configure I/O devices.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
I/O Device Configuration Item Specific Help
Floppy disk controller
Serial port A:
Base I/O address:
Interrupt:
Serial port B:
Base I/O address
Interrupt:
[Enabled]
[Enabled]
[3F8]
[IRQ4]
[Enabled]
[2F8]
[IRQ3]
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select X Sub-Menu F10 Previous Values
Floppy Disk Controller
This defines how the floppy disk controller is detected and configured.
Enabled/ Disabled
Serial Port A/B
This defines how the serial port is detected and configured.
Enabled / Disabled
Base I/O Address
This sets the base I/O address for serial port A/B.
3F8 / 2F8 / 3E8 / 2E8
Interrupt
This sets the interrupt for serial port A/B.
IRQ3 / IRQ4