RAM (Random Access Memory): technically refers to a type of memory where any byte can be accessed without touching the adjacent data, is often used to refer to the system’s main memory. This memory is available to any program running on the computer.

ROM (Read-Only Memory): a storage chip which contains the BIOS; the basic instructions required to boot the computer and start up the operating system.

SATA (Serial ATA): is an evolutionary replacement for the Parallel ATA physical storage interface. Serial ATA is a drop-in solution in that it is compatible with today’s software and operating systems. It will provide for systems which are easier to design, with cables that are simpler to route and install, smaller cable connectors, and lower voltage requirements.

SDRAM (Synchronous Dynamic RAM): called as such because it can keep two sets of memory addresses open simultaneously. By transferring data alternately from one set of addresses and then the other, SDRAM cuts down on the delays associated with non-synchronous RAM, which must close one address bank before opening the next.

Serial port: called as such because it transmits the eight bits of a byte of data along one wire, and receives data on another single wire (that is, the data is transmitted in serial form, one bit after another).

SCSI Interrupt Steering Logic (SISL): Architecture that allows a RAID controller, such as AcceleRAID 150, 200 or 250, to implement RAID on a system board- embedded SCSI bus or a set of SCSI busses. SISL: SCSI Interrupt Steering Logic ( LSI ) (only on LSI SCSI boards)

SIMM (Single In-line Memory Module): formally the most common form of RAM for motherboards. They must be installed in pairs, and do not have the carrying capacity or the speed of DIMM modules.

Sleep/Suspend mode: in this mode, all devices except the CPU shut down.

SRAM (Static RAM): unlike DRAM, this type of RAM does not need to be refreshed in order to prevent data loss. Thus, it is faster and more expensive.

SSI (Server System Infrastructure): an industry initiative intended to provide ready-to-use design specifications for common server hardware elements (chassis, power supplies, and racks) to promote and support server industry growth.

Standby mode: in this mode, the video and hard drives shut down; all other devices continue to operate normally.

Striping: see RAID

72

Page 72
Image 72
Tyan Computer i500opx warranty Striping see RAID

i500opx specifications

Tyan Computer, known for its commitment to high-performance server solutions, offers the i500OPX, a powerful server board designed to meet the demanding requirements of modern data centers. The i500OPX is built on the Intel Xeon Scalable processor family, supporting multiple CPUs that provide high core counts and multithreading capabilities. This architecture allows the i500OPX to handle intensive workloads, making it suitable for applications ranging from virtualization to big data analytics.

One of the standout features of the i500OPX is its extensive memory support. The motherboard can accommodate up to 6TB of DDR4 memory across 12 DIMM slots, enabling significant bandwidth and capacity. This is particularly beneficial for memory-intensive applications that require rapid access to large data sets. The board also supports Intel Optane memory, which enhances performance by accelerating storage applications and providing fast caching.

In terms of storage, the i500OPX supports a variety of configurations including SATA, SAS, and NVMe interfaces. This versatility allows users to implement a mix of traditional spinning drives and high-speed SSDs, optimizing performance while maintaining flexibility. Additionally, the i500OPX features multiple PCIe Gen 3 slots, enabling users to expand the server’s capabilities with GPUs or additional network cards.

Networking is another critical component of the i500OPX’s design. The motherboard includes support for advanced networking technologies, such as 10GbE and even 25GbE Ethernet options, ensuring that data can be transferred rapidly between the server and other connected hardware. This is essential for modern cloud computing and enterprise networking environments, where low latency and high throughput are paramount.

The i500OPX also emphasizes reliability and management. It is equipped with Tyan’s Advanced Server Management (ASM) technology, which provides remote management capabilities, monitoring, and alerts for system health, making it easier for IT administrators to ensure operational uptime.

In summary, the Tyan Computer i500OPX is a robust server platform that combines powerful computing performance, extensive memory and storage options, and advanced networking features. With its emphasis on scalability and reliability, the i500OPX is an ideal solution for enterprises looking to enhance their infrastructure and meet the challenges of today’s data-driven environments. Whether deployed in a cloud, enterprise, or high-performance computing environment, the i500OPX stands out as a reliable choice for demanding applications.