CEM/B/045
Product Highlights
Interfaces
The DIU 210 provides direct interfaces to the following devices:
•CEM Card Reader
•Electric Door Lock
•Fire Alarm System
•Break Glass Unit
•Exit Push Button
•Inputs from alarm devices
Up to 8 inputs can be wired from alarm/status monitoring devices directly to the DIU 210. These devices are used to monitor door sensors, DIU tamper and battery alarms and fire/ break glass emergency conditions.
If an input from the fire alarm system or break glass unit changes state, the power to the door lock is automatically dropped; this
can be sent directly to the door controller or to the host, via the card reader, for central alarm notification.
Board Protection
The DIU 210 has been designed to meet the UL294 standard providing resistance to power supply tamper, limiting the current to a reader so that shorting together the 12 Volt terminals prevents the lock from opening.
Reader Inputs
The DIU 210 can also monitor the status of all the door furniture inputs, freeing up the inputs on the intelligent CEM reader for general purpose input monitoring.
PSU Backplane Board and Enclosure
The DIU 210 is supplied with a steel enclosure and backplane board providing a mains input PSU, battery charging capabilities and door holder connections.
TECHNICAL SPECIFICATIONS
Physical |
|
|
|
Size | 300 x 250 x 150 mm |
| Battery Low (reported internally) |
| (11.8 x 9.84 x 5.9in) |
| Dedicated Power Fail Input |
|
|
| * = 4 state tamper protected inputs |
Weight | 4.3Kg | Outputs | Three 12V or 24V open collector outputs |
Power |
| ||
- Voltage |
| limited to 1.5A | |
| Current 0.6A (excluding locks and heads) |
| (Door Lock, Door Holder and External |
| Consumption |
| Sounder) |
Environmental |
| Reader Output | 12V, limited to 800mA |
- Temperature | Memory | 32kB Flash memory | |
- Humidity | 95% non condensing | ||
LED Indicators | +12 Volts OK, Lock supply OK, Lock Status, | Communication Interface | |
| Watchdog, Fault, Battery Low, RS485 Rx | To Card Reader | RS485 multidrop cable runs using copper |
| and TX. | ||
|
|
| wire with maximum length of 1.2km |
Functionality |
|
| without repeater |
|
| - Connection | 2 part screw terminals |
Inputs | * Door Position | Product Codes |
|
| * Lock Status |
| |
| * Exit Push Button | DIU/700/000 | DIU 210 (Complete with PSU Backplane |
| * General Purpose | ||
| Break Glass Sense |
| and Enclosure. |
Fire Alarm Sense
Power Fail
Tamper
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of their companies.
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland | www.cemsys.com |
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: cem.sales@tycoint.com |
