Tyco Electronics 1938L manual Installing the USB Touch Driver, Windows 2000, Me, 95/98 and NT

Installing the USB Touch Driver

Installing the USB Touch Driver for Windows XP,

Windows 2000, Me, 95/98 and NT 4.0

To install Windows 2000 and Windows XP, you must use the "update driver" method; you will not find a setup.exe file within the download.

NOTE: For Windows 2000 you must have administrator access rights to install the driver.

1.Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If running Windows 98, Windows ME or Windows 2000, the Add New Hardware Wizard starts.

2.Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.

3.When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CD-ROM.

4.Choose Next. Once the Elo USB touchscreen driver has been detected, choose Next again.

5.You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.

If Windows 98, Windows Me or Windows 2000 does not start the Add New Hardware Wizard.

1.Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.

2.Follow the directions on the screen to complete the driver setup for your version of Windows.

If the AutoStart feature is not active:

1.Click Start > Run.

2.Click the Browse button to locate the EloCd.exe program on the CD-ROM.

3.Click Open, then OK to run EloCd.exe.

4.Follow the directions on the screen to complete the driver setup for your version of Windows.

2-15