1 | 5 |
Turn off the touch computer.
2 | 6 |
Choose a location to attach the magnetic stripe reader.
3 | 7 |
Remove the two accessory covers over the chosen mounting location.
4 | 8 |
Press a small screwdriver into the cover between the two notches. As the cover bends up, grasp the end and peel it away.
Plug the cable into the connector on the touchcomputer.
Insert the hooks on the device into the corresponding slots on the touch computer.
To remove each cover, locate the two small notches on the cover.
Secure the device to the touch- computer using the included screws.
