1.Change the port value to match the value you retrieved from the Device Manager.

2.Click Connect. You should see the text Connected in the Messages field.

3.In the box labeled Param Number, enter the value 238.

4.In the box labeled “New Value” enter the value 1.

5.Check the box labeled Permanent Param Change.

6.Scan a barcode. The result should look similar to the following image:

Elo TouchSystems 15A2 User Guide 20

Page 20
Image 20
Tyco Electronics ESY15A2, 15A2 15 LCD Multifuntion Touchcomputer manual