Tyco Electronics M/A-COM, M7300 Series

MM-014716-001

MESSAGE NAME DESCRIPTION

*PHONE* Phone Call Displayed when an initiated phone call is in progress. This is displayed on line 2 of the

display.

NO ENTRY Indicates that there is no data stored in one of the programmable items in either the

phone list or individual call list. The user programmable items are items 1 through 10

in each list.

INV SYS Invalid System Displayed when the current system is an invalid type.

CHN=1-99 Channel = 1 - 99 Displayed on line 1 of the display. This is a conventional channel index displayed

when the group key is pressed.

FIX LIST Fixed List The Priority scan list is fixed and cannot be changed using the add or delete keys.

FIXED P1 Fixed Priority 1 The Priority 1 scan channel is fixed and cannot be changed using the add or delete

keys.

displaying different items under the menu when “REVISION” is selected by the

operator.

EM Emergency Indicates an emergency has been declared by the LID that follows the display, “EM.”

An example of this is “EM 01201.”

*INDV* Individual Call Displayed in line 2 of the display when an individual call is in progress (trunked and

T99 modes only).

*GROUP* Group Call Indicates a group call is in progress and is displayed on line 1 of the display (trunked

and T99 modes only).

SPKR ON External Speaker ON Displayed when the external speaker is enabled.

SPKR OFF External Speaker

OFF Displayed when the external speaker is disabled.

BANK=1-8 The bank of keys that are going to be loaded when the keyloader loads encryption

keys. This is only valid for radios that support VGS, VGE, or DES encryption. It is

displayed on line 2 of the display when the encryption keyloader is connected.

KEY LOAD Displayed on line 1 of the display when the encryption keyloader is connected.

KEY ZERO Displayed on line 2 of the display when the reset and option buttons are pressed

simultaneously for approximately two seconds. The encryption keys are zeroed.

SYS KEY System Key Displayed on line 1 of the display in the display key mode of the menu. It is followed in

the second line with a key number “KEY = <1..7>”.

KEY=1-7 Displayed on line 2 of the display in the display key mode of the menu for

conventional systems when the “SYS KEY” or “CHN KEY” is displayed in line 1 and

for trunked systems when the “SYS KEY” or “GRP KEY” is displayed in line 1.

PRIMARY Displayed on line 1 of the display when the primary keys are enabled.

PRS NAME Personality Name Displayed on line 1 of the display under the revision selection of the menu. The

personality name is displayed on line 2 at the same time.

M/A-COM Displayed on line 1 of the display under the revision selection of the menu. The