Tyco Electronics M7100IP 6 INTRODUCTION

16

6 INTRODUCTION

This manual describes how to use the M7100IP Series Mobile Radio. The M7100IP is a synthesized,

microprocessor-based, high performance mobile FM radio providing reliable two-way communications in

the Enhanced Digital Access Communications System (EDACS®) and P25 Trunking environments, as well

as, conventional communication systems.

In the EDACS or P25 Trunked system mode, the user selects a communications system and group. In this

mode, channel selection is transparent to the user and is controlled via digital communication with the

system controller. This provides advanced programmable features and fast access to communication

channels.

In the conventional mode, the user selects a channel and directly communicates on that channel. In this

mode, a system refers to a set of channels. A channel is a transmit/receive radio frequency pair.

The exact operation of the radio will depend on the operating mode, the radio's programming and the

particular radio system. Most features described in this manual can be enabled or disabled through

programming. Consult the system administrator for the particular features that are programmed into the

M7100IP.

Contents

Main 2 MANUAL REVISION HISTORY SUPPLEMENTARY INFORMATION ACKNOWLEDGEMENTS Automotive Directive 72/245/EEC 95/54/EC: Page Page Page Page 1 SAFETY SYMBOL CONVENTIONS 2 RF ENERGY EXPOSURE INFORMATION 2.1.1 Federal Communications Commission Regulations 2.2 COMPLIANCE WITH RF EXPOSURE STANDARDS 2.2.1 Mobile Antennas Vehicle Installation 2.2.2 Mobile Antennas Motorcycle Installation 2.2.3 Approved Accessories Page 3 OPERATION SAFETY RECOMMENDATIONS 3.1 TRANSMITTER HAZARDS 3.2 SAFE DRIVING RECOMMENDATIONS 4 OPERATING RULES AND REGULATIONS 4.1 OPERATING TIPS Page 6 INTRODUCTION 7 USER INTERFACE 8 CONTROLS 8.1 POWER ON-OFF VOLUME KNOB 8.2 SYSTEM/GROUP CHANNEL KNOB 8.3 RAMP CONTROL 8.4 SCAN ON/OFF 8.5 SCAN ADD/DELETE 8.6 INDICATORS 8.7 KEYPAD 8.7.1 Standard Keycap Configuration 8.7.2 Optional Keycap Configuration 8.7.3 Key Descriptions Page 8.7.4 Primary Functions (Quick Access) 9 DISPLAY 9.1 RADIO STATUS ICONS 24 9.2 MESSAGES Page Page 10 ALERT TONES Page 11 OPERATION 11.1 TURNING THE RADIO ON 11.2 SELECTION MODE RULES 11.3 DIRECT ACCESS 11.4 MENU Page 32 Table 11-1: Menu Item Information Page 11.5 FEATURE ENCRYPTION DISPLAY 11.5.1 Serial Number ROM (12 Hex Digits) 11.5.2 Feature Encryption Data Stream 11.5.3 Features Enabled 11.6 SYSTEM/GROUP/CHANNEL SELECTION 11.6.1 System Selection 11.6.2 Group and Channel Selection 11.7 LAST SYSTEM/GROUP/CHANNEL RECALL 12 TRUNKED MODE OPERATION 12.1 RECEIVING A CALL 12.2 SENDING A CALL 12.3 CONVENTIONAL FAILSOFT (EDACS ONLY) 12.4 EMERGENCY OPERATION 12.4.1 Receiving an Emergency Call 12.4.2 Declaring an Emergency 12.5 SYSTEM SCAN OPERATION 12.5.1 Wide Area System Scan 12.5.2 ProScan 12.5.3 Priority System Scan 12.5.4 When Wide Area System Scan Is Enabled 12.5.5 When ProScan Is Enabled 12.5.6 Menu Selection 12.6 GROUP SCAN OPERATION 12.6.1 Adding Groups to a Scan List 12.6.2 Deleting Groups from a Scan List 12.6.3 Nuisance Delete 12.6.4 Turning Scan On 12.6.5 Priority Group Scanning 12.6.6 Turning Scan Off 12.7 INDIVIDUAL CALLS 12.7.1 Receiving and Responding to an Individual Call 12.7.2 Call Storage Lists 12.7.3 Sending An Individual Call 12.8 SCAT OPERATION 12.9 TELEPHONE INTERCONNECT CALLS 12.9.1 Receiving a Telephone Interconnect Call (Trunked Mode Only) 12.9.2 Sending a Telephone Interconnect Call (Trunked Mode Only) 12.9.3 DTMF Overdial/Conventional Mode Telephone Interconnect 12.9.4 Programmable Entries 12.10 MOBILE DATA 12.10.1 Displays 12.10.2 DATA OFF Operation 12.10.3 DATA ON Operation 12.10.4 Exiting Data Calls 12.10.5 Scan Lockout Mode 12.10.6 Data Lockout Mode 12.11 STATUS/MESSAGE OPERATION 12.11.1 Status Operation 12.11.2 Message Operation 12.12 EDACS CONVENTIONAL P1 SCAN 12.13 DYNAMIC REGROUP OPERATION 12.13.1 Emergency Operation 12.14 RADIO TEXTLINK OPERATION (EDACS ONLY) 12.14.1 To Send a Text Message 12.15 PAGE (P25 TRUNKED ONLY) 13 CONVENTIONAL MODE OPERATION 13.1 RECEIVING A CALL 13.2 SENDING A CALL 13.3 EMERGENCY OPERATION 13.3.1 Using 5-Tone Signaling to Declare an Emergency 13.4 SCANNING CONVENTIONAL CHANNELS 13.4.1 Adding Channels To A Scan List 13.4.2 Deleting Channels From A Scan List 13.4.3 Nuisance Delete 13.5 TURNING SCAN ON 13.6 TURNING SCAN OFF 13.7 SQUELCH ADJUST 13.7.1 Menu Selection 13.7.2 Pre-Programmed Keypad Key 13.8 TYPE 99 DECODE 13.8.1 Menu Selection 13.8.2 Pre-Programmed Keypad Key 13.9 DIRECT MODE OPERATION 13.10 LAST SCANNED CHANNEL RECALL 14 PROJECT 25 (P25) CONVENTIONAL OPERATION 14.1 GROUP CALLS IN P25 MODE 14.1.1 Transmitting a Group Call 14.1.2 Receiving a Group Call 14.2 INDIVIDUAL CALLS IN P25 MODE 14.3 EMERGENCY GROUP CALLS IN P25 MODE 14.3.1 Declaring an Emergency Group Call 14.3.2 Receiving an Emergency Group Call 15 TRUNKED OR CONVENTIONAL MODE OPERATION 15.1 SIREN/LIGHT OPERATION 15.2 DIGITAL VOICE OPERATION 15.2.1 Voice Modes 15.2.2 Clear Modes 15.2.3 Aegis/ProVoice Digital Mode 15.2.4 Aegis Private, ProVoice Private, and Voice Guard1 Private Modes 15.2.4.1 Displaying the Currently Used Cryptographic Key Number 15.2.4.2 Key Zero 15.2.5 Private Operation 15.2.5.1 Receiving an Encrypted Call 15.2.5.2 Transmitting an Encrypted Call 15.2.5.3 Scanned Group Calls 15.2.6 Conventional Operation 15.3 DUAL CONTROL OPERATION 15.3.1 Switching Control 15.3.2 Control Switching Modes 15.3.2.1 Slaved Mode Operation 15.3.2.2 Independent Mode Operation 15.4 MULTIPLE RADIO OPERATION 15.4.1 Changing Selected Radio 15.4.1.1 Shared Control Unit Display Modes 15.4.1.2 Audio Modes 15.4.1.3 Muting a Specified Radio 15.4.1.4 Multiple Radio and Siren & Light Operation 15.5 MACRO KEY OPERATION 15.6 INTERCONNECT CALL (SYSTEM MODEL ONLY) 15.7 KEYPAD REMAPPING GLOSSARY Page RADIO SETUP RADIO TYPE: FREQUENCY BAND: OPERATOR'S NAME: EMERGENCY GROUP: Page Page Page Page Page WARRANTY