13 Service

Before Calling for Service

If you think your U-Line product is malfunctioning, read the OPERATION section of this guide to understand clearly the function of the control.

If the problem persists, read the NORMAL OPERATING SOUNDS and TROUBLESHOOTING GUIDE section of this guide to help you quickly identify common problems, and possible causes and remedies. Most often, this will resolve the problem without the need to call for service.

If Service is Required

If you do not understand a troubleshooting remedy, or your product needs service, contact U-Line Corporation directly. Contact information appears on the rear cover of this guide.

When you call, you will need your product Model and Serial Numbers. This information can be recorded inside the front cover of this guide. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product.

Replacement Parts

When you need replacement parts, always request genuine U-Line replacements. U-Line designs and engineers products using components that work efficiently, and provide superior service life and performance. The use of aftermarket parts or components may affect the safety, operation, performance or durability of your product, and may also void its warranty.

Normal Operating Sounds

All models incorporate rigid foam insulated cabinets to provide high thermal efficiency and maximum sound reduction for its internal working components. Despite this technology, your model may make sounds that are unfamiliar.

Normal operating sounds may be more noticeable because of the unit’s environment. Hard surfaces such as cabinets, wood, vinyl or tiled floors and paneled walls have a tendency to reflect normal appliance operating noises.

Listed below are common refrigeration components with brief description of the normal operating sounds they make. NOTE: Your product may not contain all the components listed.

Compressor: The compressor makes a hum or pulsing sound that may be heard when it operates.

Evaporator: Refrigerant flowing through an evaporator may sound like boiling liquid.

Condenser Fan: Air moving through a condenser may be heard.

Automatic Defrost Drain Pan: Water may be heard dripping or running into the drain pan when the unit is in the defrost cycle.

Troubleshooting Guide

DANGER

ELECTROCUTION HAZARD. Never attempt to repair or perform maintenance on the unit until disconnecting the main electrical power.

Troubleshooting - What to check when problems occur:

Problem

Possible Cause and Remedy

Interior Light

The light bulb may be defective.(See MAINTENACE)

Does Not

 

Illuminate.

 

 

 

Light Remains

Adjust light actuator bracket ob bottom of door.

on When Door

 

is Closed.

 

 

 

Unit Develops

Unit is a manual defrost model that will require

Frost on

occasional defrosting. When there is build-up of 1/4”

Internal

or more, manually defrost the unit.

Surfaces.

Ensure the door is closing and sealing properly.

 

High ambient temperature and excessive humidity

 

can also produce frost.

 

 

Unit Develops

The unit is exposed to excessive humidity, moisture

Condensation

will dissipate as humidity levels increase.

on External

 

surfaces

 

 

 

Product is

Adjust the temperature to a warmer set-point. (See

Freezing in

OPERATION)

Combo Models.

 

 

 

Product is Not

Air temperature does not indicate product

Cold Enough in

temperature. See OPERATION - Checking Product

Combo models.

Temperature.

 

Adjust the temperate to a cooler set-point. (See

 

OPERATION)

 

Ensure unit is not located in excessive ambient

 

temperatures or in direct sunlight.

 

Ensure the door is closing and sealing properly.

 

Ensure the interior light has not remained on too

 

long.

 

Ensure nothing is blocking the front grille, found at

 

the bottom of the unit.

 

Ensure the condenser coil is clean and free of any dirt

 

or lint build-up.

 

 

Ice Cubes

During periods of limited use or high ambient

Sticking

temperatures, it is common for cubes to fuse

Together

together. Gently shake the bucket to break apart

 

cubes.

 

 

No Ice

Ensure the bin arm is not in the up (off) position.

Production

 

 

 

Not Enough Ice

Ensure the condenser coil is clean and free of any dirt

 

or lint build-up.

 

 

Water in Bucket

Ensure cube size adjustment is not se too high.

 

 

U-Line Combo® Models and Ice Makers Service

23

Page 25
Image 25
U-Line C2275DWR, CO2175FF Before Calling for Service, If Service is Required, Replacement Parts, Normal Operating Sounds

C2275DWR, 2175RF, CO2175FF specifications

The U-Line CO2175FF and 2175RF are two of the standout offerings in U-Line’s expansive portfolio of beverage centers, designed to provide both functionality and elegance in residential and commercial settings. Known for their commitment to quality and innovation, U-Line has crafted these models to meet the diverse needs of modern consumers.

The CO2175FF features a dual zone temperature management system, allowing users to store wine and beverages at optimal temperatures. With a precise range from 34°F to 60°F, it ensures that your collections will be preserved perfectly, making it ideal for wine enthusiasts and casual drinkers alike. The refrigerator is equipped with a stainless steel exterior, which not only provides a sleek and sophisticated look but also ensures durability. The glass door is UV-resistant, protecting your beverages from harmful light exposure.

On the other hand, the U-Line 2175RF model focuses on a robust refrigeration system designed for maximum storage capacity. This model features adjustable shelving that provides flexibility to accommodate bottles of various sizes, from standard wine bottles to larger formats. With a total capacity of approximately 24 wine bottles, it gives ample space for your collection while maintaining easy access to all your favorites.

Both models boast a quiet operation and are designed to be energy-efficient, making them ideal for those looking to minimize their environmental impact without sacrificing performance. With state-of-the-art technology such as the touch control panel, users can easily adjust settings and monitor temperature conditions, ensuring peace of mind when it comes to beverage storage.

The U-Line CO2175FF and 2175RF also feature built-in LED lighting, which not only enhances visibility but also adds a touch of ambiance to any room. Users can enjoy their favorite drinks in style, thanks to the elegant interior design.

In summary, the U-Line CO2175FF and 2175RF models represent the perfect blend of style and functionality. With features like dual temperature zones, adjustable shelving, and energy-efficient technology, they cater to the needs of modern beverage storage, making them an excellent choice for any home or business. Whether entertaining guests or simply enjoying a quiet evening, these beverage centers offer a sophisticated solution for all your storage needs.