1

Install bottom hinge:

1.If you have a plate hinge, reorient the pivot screw so it protrudes the opposite direction form the hinge. Remove the pivot screw from the hinge. Turn the plate over and reinstall the screw.

2.Align hinge outer edge with cabinet. For models with a plate hinge, the flat edge of the hinge alignes with the outer edge of the cabinet.

Install two or three screws, depending on model. Replace nuts if used.

Prepare door for reinstallation:

For black or white doors:

1.Remove plastic hole plug from top of door handle and reinstall on opposite side.

2.Remove plastic hinge bushing on bottom of door and reinstall on opposite side. Clean out bushing hole in door bottom with a screwdriver if necessary.

 

3

 

 

 

4

 

 

2

 

Install top hinge, and door:

1

1.

Reorient the pivot screw so it protrudes the opposite

 

 

 

 

direction from the hinge. Remove the pivot screw from the

 

 

 

hinge. Turn the plate over and reinstall the screw.

 

 

2.

Hold door to keep it from falling.

 

Prepare door for reinstallation:

3.

Lift the door on to the bottom hinge.

 

For stainless steel models with glass doors:

4.

Align flat edge of the hinge with the outer edge of the unit.

 

3. Stainless glass doors are flipped upside down to be reversed.

5.

Install three or four screws, depending on model.

 

4. Lay the door on it’s side. Remove the plastic hole plug (1) and

Align and adjust the door:

 

install in the corner opposite of where it was removed.

1.

Align and adjust the door, see DOOR ALIGNMENT AND

 

 

 

5. Remove the plastic hinge bushing (2) and install in the corner

 

ADJUSTMENT above.

 

opposite of where it was removed.

Install grille:

 

 

6. Remove the U-Line nameplate (3) from door. This will reveal

Install the grille, see MAINTENANCE section of this guide.

mounting holes for the door actuator bracket.

 

7.Remove door actuator (4) from door. Be sure to only remove the two screws holding the actuator to the door. Reinstall the actuator (4) on the opposite end of the door where the nameplate was removed.

8.Install new nameplate where the actuator assembly was removed.

9.Install screws into holes on opposite side, where the hinge was removed. Replace nuts if used.

18

U-Line Standard Door Alignment and Reversal

Page 19 Page 21
Page 20
Image 20
U-Line 2175RF Install bottom hinge, Prepare door for reinstallation For black or white doors, Install top hinge, and door
Page 19 Page 21

C2275DWR, 2175RF, CO2175FF specifications

The U-Line CO2175FF and 2175RF are two of the standout offerings in U-Line’s expansive portfolio of beverage centers, designed to provide both functionality and elegance in residential and commercial settings. Known for their commitment to quality and innovation, U-Line has crafted these models to meet the diverse needs of modern consumers.

The CO2175FF features a dual zone temperature management system, allowing users to store wine and beverages at optimal temperatures. With a precise range from 34°F to 60°F, it ensures that your collections will be preserved perfectly, making it ideal for wine enthusiasts and casual drinkers alike. The refrigerator is equipped with a stainless steel exterior, which not only provides a sleek and sophisticated look but also ensures durability. The glass door is UV-resistant, protecting your beverages from harmful light exposure.

On the other hand, the U-Line 2175RF model focuses on a robust refrigeration system designed for maximum storage capacity. This model features adjustable shelving that provides flexibility to accommodate bottles of various sizes, from standard wine bottles to larger formats. With a total capacity of approximately 24 wine bottles, it gives ample space for your collection while maintaining easy access to all your favorites.

Both models boast a quiet operation and are designed to be energy-efficient, making them ideal for those looking to minimize their environmental impact without sacrificing performance. With state-of-the-art technology such as the touch control panel, users can easily adjust settings and monitor temperature conditions, ensuring peace of mind when it comes to beverage storage.

The U-Line CO2175FF and 2175RF also feature built-in LED lighting, which not only enhances visibility but also adds a touch of ambiance to any room. Users can enjoy their favorite drinks in style, thanks to the elegant interior design.

In summary, the U-Line CO2175FF and 2175RF models represent the perfect blend of style and functionality. With features like dual temperature zones, adjustable shelving, and energy-efficient technology, they cater to the needs of modern beverage storage, making them an excellent choice for any home or business. Whether entertaining guests or simply enjoying a quiet evening, these beverage centers offer a sophisticated solution for all your storage needs.
Top Page Image Contents