User’s Manual
8.Install bottom hinge on cabi- cabinet, opposite side, align- ing flat edge of hinge with outer edge of unit. Partially tighten screws (Figure 32).
9.Relocate plastic spacer/
bushing on bottom of door to opposite side (Figure 27). Clean out bushing hole in door bottom with a screwdriver if needed.
UL129
Figure 32
10.Place door on lower hinge pin. Align flat edge of top hinge with outer edge of unit and fasten upper hinge to unit (four screws). Partially tighten screws until door is aligned (Figure 30).
11.Adjust door to assure proper seal. Tighten upper and lower hinge screws securely.
12.Replace four plastic plugs removed in step 5 into holes on top of unit. Replace screws in holes in bottom of unit, opposite side.
13.Reinspect door seal and alignment. Adjust if needed.
14.Reinstall grille (one screw).
30