User’s Manual

MARINE USE

Many U-Line models are designed to operate in a harsh marine environment. Special considerations include the following:

•For best performance, keep the unit out of direct sunlight.

•On Ice Maker models, turn the unit OFF and dispose of any ice cubes if the unit will not be used for 5 days or more. Prop door open to allow for air circulation and prevent mold and mildew. Do not use anti- freeze in your icemaker.

•If the ambient temperature is expected to drop below 45°F, drain all water from the unit to prevent freezing damage not covered by the warranty.

•High ambient temperatures (110°F or higher) may reduce the unit’s ability to reach low temperatures and may also reduce the ice pro- duction rate.

ADJUSTING THE TEMPERATURE

CONTROL

Models BI-95 and BI-98: Use a flat tip screwdriver to turn adjusting screw, located behind front grille, clockwise for colder (slower ice pro- duction) or counterclockwise for warmer (faster ice production).

Series 15, 29 and 75: Adjust control setting by turning the numbered dial (see Figure 38).

Model SP18 temperature control has been preset at the factory for optimum ice production. Do not attempt to make adjustments.

CONTROL

 

4

5

3

 

 

 

2

 

6

 

 

1

 

7

 

 

UL504

Figure 38

26