Self-Closing Doors

Door Alignment and Adjustment

Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior.

NOTICE

•Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket to assure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door.

•The door will not be flush with the top of the cabinet. The top edge of the door will be 1/8 in. (3.175 mm) below the cabinet top.

1/8"

(3.175 mm)

To align and adjust the door:

1.Compare the top edge of the door (opposite the hinges) to the top edge of the cabinet and note the type (up or down) of adjustment needed.

1

23

2.Remove the top hinge pivot pin with a Phillips screwdriver and lift door off bottom hinge pin. Be careful not to lose the door closer insert sets.

3.Turn the door upside down and inspect the hinge plate mounting holes. The plate has slotted mounting holes. Loosen but do not remove the two hinge plate screws (1).

4.If door edge opposite the hinges needs to move up, move plate toward outside of door (2). If door edge needs to move down, move plate toward inside of door (3). Repeat until top edge of door is parallel with top of cabinet and tighten screws (1) securely.

4

5.After adjustment is complete, remove the door closers from the bottom hinge, clean thoroughly and apply petroleum jelly to the mating surfaces of the closers. Be sure that pins on closers align with holes in the door and bottom cabinet hinge plates. Mount door and install top hinge pivot pin.

Door Reversability

Location of the unit may make it desirable to mount the door on the opposite side of the cabinet.

Reversing Stainless Steel Glass Doors

Remove Door

3 1

2

1.Hold door to keep it from falling.

2.Remove hinge screw pin (1) from top hinge using a Phillips screwdriver.

3.Remove door by tilting forward and lifting door off bottom hinge closer inserts.

4.Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.

Remove Hole Plugs

1.Remove plastic screw plugs from (three each, top and bottom)

(3) from new hinge location. Save for reinstallation later.

12

u-line.com

Page 14 Page 16
Page 15
Image 15
U-Line U-2275ZWCS-00 manual Door Alignment and Adjustment, Door Reversability, Reversing Stainless Steel Glass Doors
Page 14 Page 16

U-2275ZWCS-00, U-2275ZWCOL-00, U-2275ZWCS-01, U-2275ZWCOL-60 specifications

U-Line is a well-respected name in the realm of premium refrigeration, particularly known for its innovative designs and superior craftsmanship. Among its impressive lineup, the U-Line U-2275ZWCOL-60, U-2275ZWCS-01, U-2275ZWCOL-00, and U-2275ZWCS-00 models stand out due to their functionality, aesthetic appeal, and technological advancements.

The U-2275ZWCOL-60 model is a 24-inch wide refrigerator designed to fit seamlessly into a variety of settings. This unit boasts a robust capacity and is perfect for those who require extra storage without compromising on style. The refrigerator features adjustable shelves, which can be configured to accommodate a variety of items, from tall bottles to smaller jars.

Meanwhile, the U-2275ZWCS-01 and U-2275ZWCS-00 models represent the same stylish design, with differences largely in finish. The U-2275ZWCS-01 has a stainless steel finish that appeals to modern kitchens, while the U-2275ZWCS-00 offers a sleek, integrated look that blends beautifully with cabinetry. Both models feature U-Line's renowned digital touch pad controls, allowing for precise temperature management, ensuring your beverages and perishables are stored in optimal conditions.

Another essential feature across these models is the superior LED lighting that illuminates the interior, making it not only functional but also visually appealing. The gentle, soft glow ensures items are easily visible, enhancing usability while minimizing energy consumption. The energy-efficient design is part of U-Line's commitment to sustainability.

All four units are equipped with U-Line’s advanced cooling technology, which uses a convection cooling system. This ensures rapid temperature recovery and consistent temperature management throughout the unit, keeping your food and beverages chilled to perfection. Additionally, the models come with a frost-free operation, eliminating the need for manual defrosting.

In terms of characteristics, these units are designed for versatility, suitable for both residential and commercial applications. Their elegant design and customizable features allow users to personalize their refrigeration experience. The ability to install them as either built-in or freestanding units gives flexibility in placement.

In conclusion, the U-Line U-2275ZWCOL-60, U-2275ZWCS-01, U-2275ZWCOL-00, and U-2275ZWCS-00 models exemplify U-Line's commitment to quality, innovation, and style. With a blend of modern technology and classic design, these units offer exceptional performance and aesthetic appeal for any kitchen or entertaining space.
Top Page Image Contents