Orient Hinges
1. Remove existing top hinge (three screws) (2).
Reversing the Door
1
2
Reinstall hinge to bottom opposite.
1.Install the hinge just removed from the top to the BOTTOM opposite side of the cabinet (three screws) (2).
2.Remove the two door closer inserts (4) from the preexisting bottom hinge.
4
4
3.Install door closer inserts as shown on the new bottom hinge
(4).
Remove existing bottom hinge.
1.Remove the existing bottom hinge (three screws) (2).
Reinstall hinge to top opposite.
1.Install the hinge just removed from the bottom to the TOP opposite side of the cabinet (three screws) (2).
Reinstall Hole Plugs
1.Install plastic screw plugs (three each, top and bottom) (3) into holes where hinge hardware was removed.
Install Door
1.Hold door upright and tilted forward.
2.Lift door on to bottom hinge closer inserts.
3.Tilt door forward into position.
4.Hold door to keep it from falling.
5.Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.
Align and adjust the door:
Align and adjust the door, see DOOR ALIGNMENT AND ADJUSTMENT on page 12.
The hinge hardware will be removed and reinstalled on the opposite side of the cabinet.
The top hinge hardware will be reinstalled on the bottom of the opposite side of the cabinet.
The bottom hinge hardware will be reinstalled on the top of the opposite side of the cabinet.
To reverse the door:
3 1
2
Remove door.
1.Hold door to keep it from falling.
2.Remove hinge screw pin (1) from top hinge using a Phillips screwdriver.
3.Remove door by tilting forward and lifting door off bottom hinge closer inserts.
4.Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.
Remove hole plugs.
Remove plastic screw plugs (three each, top and bottom) (3) from new hinge location. Save for reinstallation later.
14 |
