Remove Stainless Frame
1.Remove two screws from top of door. Save screws for later installation.
Top Of Door
Screws
2.Remove pivot plate from bottom of door by removing 2 screws. Set pivot plate and screws aside for later installation.
Bottom Of Door
Pivot Plate
Screws
3.Grasp outer edge of stainless frame and firmly press inside edge of glass in while pulling stainless frame in opposite direction.
Pull Frame
Away
Push Glass
In
4. Unhinge frame from door.
Assemble Stainless Frame
1.Prop frame against solid surface, handle side down and away.
2.Insert door, logo forward, into frame at a 30° angle. For a right hand hinge the logo should be to your right. For a left hand hinge the logo should be to your left.
Door Orientation Right Hand Hinge
Logo |
Door Orientation Left Hand Hinge
Logo |
3.Swing door into frame.
4.Install screws removed in “Remove Stainless Frame” step 1 to top of door, opposite handle.
5.Install pivot plate to bottom of door, opposite of handle, using hardware removed in “Remove Stainless Frame” step 2. Arrange pivot plate so the flat edge is against the edge of the door.
Door Edge |
Pivot Plate |
Flat Edge |
13 |
