U-Line U-3018WCS-15 Interior Lighting, Quick Chill, Model, Mode Run Time, To Initiate quick chill

Food Storage Chart

Mode	Food Types
Deli	Meats, Fish, Cheeses, Dairy, Butter, Garlic, Oils,
	Nuts, Condiments
Market	Fruits, Vegetables, Berries, Lettuce
Pantry	Dry Goods, Breads, Baking Items, Spices,
	Seasonings
	Root Vegetables, Potatoes, Onions, Lemon, Lime,
Root	Melon, Peppers, Beans, Cucumber, Cut
	Vegetables

The 3036 Models have two independently controlled zones. Each zone may have its own mode and set point. The 3018 models have a single zone. Available Mode Settings will vary with model.

1.In order to adjust temperatures in the 3036 you must first select a Zone to adjust. To select, press Zone Toggle . The left side Mode Setting will flash. Pressing Zone Toggle again will select the right side and the right side Mode Setting will flash. For 3018 Models simply press Select to alter Mode Settings.

2.Pressing Select will cycle through the available modes for your model. Reference the Mode Settings Chart on pg 3 for each Setting’s default set point and range.

3.Once your have selected your desired Mode the default set temperature will display. You may further fine tune the temperature by pressing Up or Down .

Quick Chill

CAUTION

A number of zones include a quick chill feature. Quick chill is designed to quickly pull warm beverages and foods down to optimum storage temperature. It is important to only initiate quick chill modes when the Refrigerator or Wine Captain® have been fully loaded with warm product. Failure to follow this notice could result in food or beverages that are cooled to a point below optimum or frozen.

The following table lists modes which include the quick chill feature and the time which quick chill will run.

Mode	Run Time
Beverage	4	Hours
Deli	5	Hours
Market	4	Hours
Pantry	4	Hours
Red Wine	Not Available
Root	1	Hour
Sparkling	1	Hour
White Wine	1	Hour

To Initiate quick chill.

1.In 3036 models use Zone Select to select the desired zone, left or right.

2.Press Select to select the desired mode setting.

3.Press Down until the temperature set point reads “Quick”

The quick chill feature will then begin for the period of time dictated by the mode type. To cancel quick chill, simply select a set point other then “quick”.

Note: There may be a delay before quick chill is activated in 3036 models. If the opposite zone is currently in a cooling cycle while quick chill is selected, the cooling cycle on the opposite zone will first be completed.

Note: Please note, that when quick chill is activated in a 3036, the zone opposite the active quick chill zone will not return to a cooling cycle until quick chill is complete. If storing product in the opposite zone it is important to limit the number of times the door is opened in the zone not currently under quick chill.

Interior Lighting

Your U-Line 3000 Series unit uses a state of the art LED lighting system. The 3036 model dual zone’s lighting can be independently controlled or set as a group.

3036 Model

Up	Zone Indicator	Zone Toggle
Zone Indicator		Select
U-SELECT LIGHTING
LIGHTING	LEVEL
ON WITH DOOR	HIGH
3036 Model Display Shown
		Power
Down	U-Select Lighting

1.To begin, press U-Select Lighting to enter the lighting menu.

2.In 3036 Models the unit initially defaults to control the lighting in both Zones simultaneously. To select a single zone press Zone Toggle . Notice the arrows on top of the display changing state. Pressing Zone Toggle once will select the left side zone, pressing it again will select the right side zone, pressing it a third time will select both zones again.

3.Use Up or Down to cycle through each available brightness setting; Low, Medium, or High.

4.Use U-Select Lighting to cycle through each available timer setting. Selections include “On With Door”, “On 3 Hours”, “On 6 Hours”, or “On 24 Hours”.

5.To exit, press Select or simply wait for the menu to time out.

U-Line Product Operation 4