Ultra electronic 3503-1004, 3503-1002 quick start Magicard Sprinter Flip

Models: 3503-1002 3503-1004

1 42
Download 42 pages 5.49 Kb
Page 37
Image 37

Ultra Electronics Card Systems

Quick Start Guide

1.Hinge down the Pull-down Card Tray. Hinge down the Front Cover and lift up the Top Cover to the vertical position, and remove the Cassette. Switch ON the power supply.

2.Get the motor to turn the rollers by operating the Cover Microswitch in the hinged cover, by hand. Allow the motors to achieve full operating speed before applying the Cleaning Card to the rollers, otherwise the motors will stall and the rollers fail to turn.

3.Clean the Front Rubber Drive Roller every 1000 cards printed or if mis-registration occurs. Open a fresh solvent impregnated Cleaning Card and clean the Front Rubber Drive Roller by inserting the Cleaning Card from the front with the impregnated side faced down, with the rollers turning so that the roller turns against the Cleaning Card as shown in Position A.

4.Clean the Printhead Roller, normally positioned beneath the Thermal Printhead, by applying the Cleaning Card (with the impregnated side faced down) to the visible surfaces of the Printhead Roller so that the roller turns against the Cleaning Card as shown in Position D.

NOTE Discard the Cleaning Card when it has dried out. One or two cards should be sufficient to carry out these instructions.

5.Clean the Rear Rubber Drive Roller by inserting the Cleaning Card with the impregnated side faced down, from the rear with the rollers turning (ie, beneath the Card Preventer and the Sticky Roller) so that the lower roller turns against the Cleaning Card as shown in Position E.

6.Clean the Card Feed Rollers every 1000 cards printed or if problems occur with cards feeding from the Cassette. Using the Cleaning Card clean the two Card Feed Rollers. One is normally beneath the Card Cassette and the other is close to theSticky Roller. These rollers are geared together and cannot be turned by operating the Cover Microswitch as above. Turn one Card Feed Roller by hand whilst applying the Cleaning Card, with the impregnated side faced down, to the other Card Feed Roller. Repeat the cleaning process for the other Card Feed Roller as shown in Positions B and C.

MAGICARD Sprinter Flip

Page 37

Page 37
Image 37
Ultra electronic 3503-1004, 3503-1002 quick start Magicard Sprinter Flip

3503-1002, 3503-1004 specifications

Ultra Electronics 3503-1004 and 3503-1002 are advanced communication systems designed to meet the stringent demands of various military and defense applications. These two models stand out due to their robust features, cutting-edge technologies, and distinct characteristics that enhance operational effectiveness.

Both the 3503-1004 and 3503-1002 employ state-of-the-art technology to ensure secure and reliable communications in challenging environments. They utilize frequency-hopping spread spectrum techniques, which enable them to operate over a wide frequency range. This capability not only enhances signal integrity but also mitigates the risks of jamming and interception, making them ideal for tactical operations.

One of the main features of these models is their high data rate capability. The systems can support multiple channels simultaneously, allowing for efficient transmission of voice, video, and data. This feature is crucial for modern military operations that require seamless interoperability between different units and platforms.

The 3503-1004 model is particularly noted for its extended operational range. Leveraging advanced modulation schemes, it can transmit signals over long distances while maintaining clarity and minimal latency. This is essential for units operating in dispersed formations or in remote areas where traditional communication systems may falter.

On the other hand, the 3503-1002 is optimized for portability and ease of deployment. Weighing significantly less than conventional communication systems, it can be rapidly set up by operators in the field. This mobility is complemented by its battery-efficient design, which extends operational time and reduces the need for frequent recharging.

Both models feature robust encryption protocols to ensure mission-critical communications remain clandestine. The use of sophisticated algorithms guarantees that transmitted information is protected against unauthorized access, which is vital in today’s warfare landscape.

In summary, Ultra Electronics 3503-1004 and 3503-1002 embody the future of tactical communications with their high data rates, secure transmission, extended range, and portability. These characteristics make them indispensable tools for military personnel striving to maintain an edge in modern combat scenarios. As technology continues to evolve, these systems represent a significant leap forward in ensuring that communication remains reliable, secure, and effective in the theater of operations.