Uniden ANA 9710 manual

1. Insert two mounting screws into the wall 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the phone.

2.Plug and secure the AC Adapter cord by following steps 2 and 3 of the Standard Wall Plate Mounting.

3.Plug one end of the telephone line cord into the LINE jack on

the Base Unit. Optionally, plug one end of a standard 2500 type desk phone into the PHONE jack. Then place the telephone cord(s) inside the molded channel(s) on the bottom of the Wall Mount stand.

4.Place the Base Unit on the posts of the wall screws and push down until it is firmly

seated.

14

Image 20

Uniden ANA 9710 manual

Contents

ANA One Year Limited Warranty Covered under one or more of the following U.S. patents Precautions Handset Controls & Functions Base Unit Controls & Functions Table of Contents Important Safety Instructions Page About Your ANA Range Telephone Line ProblemsImportant Electrical Considerations Privacy Radio InterferenceMore Than One Cordless Telephone ANA 9710 Features Installing Your ANA Selecting the Installation LocationConnecting the Telephone Line Hardwired Jack Connecting the Telephone Cords Tone/Pulse Switch Applying Power to the Base and Charger UnitsPage Wall Installation Standard Wall Plate Mounting Direct Wall Mounting Page Charging Unit Wall Mounting Page Attaching the Beltclip to the Handset Installing the Handset Battery Pack Charging the Handset Battery Pack Charging Spare Battery Packs Low Battery Indicator Using Your ANA 9710 Handset Cleaning the Battery and Charging Unit Contacts ANA 9710 Handset Controls Earpiece Volume Handset Ringer Switch Handset Ringer tone and volumeVibrate Mode Using the Handset Answering a Call Making a Call Feature Buttons Connecting a Conference CallPlacing a call on hold Transferring a Call Programming the Feature Buttons Function Keys Hold Using Your ANA 9710 Memory Storing a Number Erasing a Stored Number Example Store 555-1234 in memory location Dialing with a Stored Number Memory Search Chain Dialing Using the Page/Find Using Your ANA 9710 Base UnitUsing the Hold Optional Headset EXP9530 Using an Optional Second 2500-type Analog Telephone Connecting the Desk TelephoneTransferring a Call to the ANA Transferring a Call to the Desk Telephone Typical Applications Optional Accessories and Replacement Parts Troubleshooting Problem Suggestion Handset SpecificationsBase Unit Memo