![](/images/new-backgrounds/1148922/14892221x1.webp)
Features
Channel Memory Scanning — Scans frequencies you have stored in any of the channels or banks at a rate of up to 70 channels per second.
Memory Availability — Store and then scan any of up to 300 channels distributed over 10 banks.
SAME
Direct Channel Access — Press 0 - 9 and HOLD to directly access any stored frequency.
Channel Lockout/Frequency Lockout — Skip over stored frequencies (channels) using the Lockout feature to enable faster scanning. Lets you designate up to fifty frequencies to skip during a search (limit or service) to increase the scanning speed.
Radio Controlled Clock — Automatically sets to the precise time using NIST broadcasts.
AM/FM and TV
Priority Channel — Designate a specific frequency as a Priority Channel. The radio scans and checks that channel every 2 seconds. Select and designate up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert — Lets you know that a selected frequency has already been programmed into memory if you attempt to store it again.
Limit Frequency Searching — Lets you designate lower and upper frequency range and search within that range for active frequencies. You can then store frequencies in memory as channels for later recall.
Service Search — Lets you designate one of the five preprogrammed service channels (Police, Fire/EMS, Air, Ham, Marine) to search.
Scan and Search Speed
• Scan Speed | 70 channels per second maximum in SCAN MODE |
• Search Speed | 75 steps per second maximum in SEARCH MODE |
• TURBO MODE | For frequency steps 5kHz apart, searching occurs in |
| Turbo Mode which is 225 steps per second. |
| Introduction |
11