Care and Maintenance

Low Battery Warning

When the Batteries become weak, you will hear an audible warning. Be sure to replace Alkaline Batteries as soon as possible, or you can recharge Nickel-Cadmium Batteries while they are installed in the scanner.

Replacing the Batteries

See page six.

Locationn

If strong interference or electrical noise is received, relocate the scanner or its antenna away from the source of the noise. A higher elevation, if possible, may provide better reception.

Do not use the scanner in high-moisture environments

nsuch as the kitchen or bathroom.

Avoid placing the unit in direct sunlight or near heating elements or vents.

Cleaning

Disconnect the power to the unit before cleaning.

Clean the outside of the scanner with a mild detergent.

To prevent scratches, do not use abrasive cleaners or

nsolvents. Be careful not to rub the LCD window. Do not use excessive amounts of water.

Repairs

Do not attempt any repair. The scanner contains no user serviceable parts. Contact the Uniden Customer Service Center or take it to a qualified repair technician.

Proper Care of Your Scanner

Use only the AC Adapter/Charger that came with your scanner.

Avoid placing the scanner in direct sunlight or near

nheating elements or vents.

Do not subject the scanner to extremes in temperature. If the scanner is exposed to temperatures below 14°F or above 140°F, the liquid crystal display may temporarily cease to function properly, or can become permanently damaged.

20

Page 23
Image 23
Uniden BC60XLT manual Care and Maintenance