Operating Tips
If your BC60XLT is not performing properly, try the steps listed below.
CONDITION | SUGGESTION |
|
|
|
|
Scanner doesn’t turn | Rotate the Volume control to the |
on. | right. |
| Check the Batteries for correct |
| installation. |
| Check the power level of the |
| Batteries. Replace or recharge |
| Batteries as necessary. |
| Check the AC Adapter/Charger or |
| the (optional) Cigarette Lighter |
| Adapter for a good electrical |
| contact at the scanner. |
| Make sure there is power at the |
| AC outlet (or the vehicle’s |
| cigarette lighter). |
| Check the |
| (optional) Cigarette Lighter |
| Adapter cord. If blown, replace it |
| with the same type of fuse. |
Poor reception. | Check the antenna connection. |
| Make sure the antenna is in a |
| vertical position. |
| If you’re inside a building, move |
| the scanner to a window, an |
| outside wall, or outdoors. |
| Check for sources of interference |
| such as computers, microwave |
| ovens, or other electrical devices. |
| Move the scanner as necessary. |
| You may be too far away from the |
| stations using the frequencies |
| you have programmed. Try |
| another location, or program |
| frequencies for stations closer to |
| your area. |
Scanner doesn’t receive | Adjust the Squelch setting. It |
weather channels. | may be too high. |
| In some parts of the country, you |
| may not be able to monitor |
| weather broadcasts, such as in |
| low lying areas. Move the |
| scanner to a higher location. |
| Reception may be poor. See |
| above for suggestions. |
|
|
22
