Uniden BC 235XLT Scanning

Scanning

When you turn on the

power, the BC

235XLT

automatically starts in

the Scan mode.

During normal

scanning the scanner

skips unprogrammed

or locked out

channels.

When a transmission

is received, the

Scanner stops on that

channel. When the

transmission ends,

scanning resumes

automatically after

two seconds.

To stop on a channel

during scanning,

press .

To resume scanning,

press .

CHANNELS

Frequency not

entered

Frequency

Locked Out

(L/O)

SCAN

Contents

Main TABLE OF CONTENTS Introduction programmed What is Scanning? What is Searching? Types of Communications Feature Highlights Where to Obtain More Information Betty Bearcat Starter Frequency Guide Mr. Scanner (800) Number Included with Your Scanner Setup Installing the Batteries Ni-Cd BATT. REG. ALK. BATT. Note: If you are installing alkaline batteries, set the switch to AC Adapter/Charger Charging Warning Page Basic Operation Note: You can fold out the Front Cover to see the Controls and Indicators while reading this Guide. Setting the Squelch Page Page Programming Note: To clear a mistake while entering the frequency, press B twice, and start over. Duplicate Frequency Alert CH Programming Tips Scanning 1 3 4 5 9 102 6 7 8 Page Locking a Channel While Scanning Lockout Tips Restore a Locked Out Channel Restore All Locked-out Channels Priority Scan Changing the Priority Channel Chain Search Setting a Search Range Error Page Page Page Channel Skip D Storing Search Frequencies Note: These frequencies were used during Setting a Search Range, on page 23. D Page Weather Scan S Care and Maintenance General Use Location Cleaning Page Troubleshooting Specifications Abovebands in 5 kHz steps Abovebands in 12.5 kHz steps Accessories and Replacement Parts One Year Limited Warranty