UNPACKING YOUR UNIT

Carefully remove the unit from the shipping carton and check the contents against the following list:

. Uniden' Bearcat' 50XL

. BeltClip

. Flexible Antenna

. Battery Holder (for non rechargeable battery) Operating Guide (read it and save)

If any of these items are missing or if there are signs of physical damage, DO NOT attempt to operate the unit Notify your dealer or shipping earner immediately.

NOTE:Keep the shipping carton and packing materials, as well as all the printed material. This carton serves as an excellent method to transport your new scan- ner for service or any other reason.

BATTERY AND ANTENNA INSTALLATION

Please read the following instructions carefully and completely before operating your scanner.

STANDARD NON-RECHARGEABLE BATTERIES

Open battery compartment by pressing on battery door where indicated and slide off. Install 5, AA size non-rechargeable batteries in the separate holder. Be sure that the t- and - terminals of the batteries are properly installed Improper installation may result in damage to your unit. Replace the battery compartment door by sliding it back into place

NOTE. 00 not use RECHARGEABLE BATTERIES' Your scanner WILL NOT WORK if you install AA size RECHARGEABLE BATTERIES. Use only the Un/den model BP 50 or BP 55 rechageable battery pack.

CAUTION: When charging, be sure to turn power switch off. Use only UNIDEN Model AD-100U battery charger. Charging time with AO-100U is approximately as below.

Battery pack BP-50: 7 - 8 hours

Battery pack BP-55' 15- 16hours

Do not charge NiCad battery for more than above standard time, as otherwise it will create damage or overheating of battery.

RECHARGEABLE BATTERY PACK

You can purchase an optional NiCad battery pack from your local dealer or from Uniden. The rechargeable battery pack fits into the battery compartment and also comes with a battery charger. You can use your Uniden" Bearcat' 50XL for years without ever having to buy batteries.

4

Page 4
Image 4
Uniden BC 50XL manual Unpacking Your Unit, Battery and Antenna Installation