Available Features
After the headset is connected, you can use the following features:
| Just make the call from your mobile phone as usual; your phone should | |
Make a call | automatically send the call to the headset. If your phone doesn’t, press and hold | |
| Power for 2 seconds to send the call to the headset manually. | |
Answer a call | While the call is ringing, press Power. | |
Hang up | Press Power. | |
Send a call back | During a call, press and hold Power for 2 seconds. The headset sends the call to | |
to your phone. | your phone and disconnects from the phone. | |
Reject an | Press and hold Power for 2 seconds; when you hear a beep, release the button. | |
incoming call | ||
| ||
Redial the last | Press and hold Volume Down; when you hear 4 beeps, release the button. | |
number | ||
| ||
Activate voice | With the phone in standby, press Power and release. When you hear a beep, | |
start using your phone’s voice commands. (Your phone must support voice | ||
dialing | ||
dialing, and all commands must be | ||
|
