1.With the phone in standby, press and hold # on any handset. The phone prompts you to select the number of hours (1 - 9 or Always On) that you want it to stay in silent mode.
2.To confirm, press # or just wait about 5 seconds. The phone displays Silent Mode On on each handset.
3.After the selected number of hours, the phone automatically exits silent mode. To exit silent mode manually, press and hold # again.
Multihandset Features
##To use the features in this section, you need at least 2 handsets.
♦♦Your base supports a total of 12 cordless handsets: the one that came with the base and up to 11 DCX160 accessory handsets. Your base also supports a total of 2 DRX100 range extenders, including any that came with your phone.
♦♦You must register accessory handsets to the base before using them. (Handsets that came packaged with the base are already registered.)
♦♦Handsets that aren’t registered display a Not Registered message. For registration instructions, see p. 14, or see the accessory handset manual.
♦♦If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 14, or see the accessory handset manual.
Conference Calling
♦♦When an outside call comes in, two cordless handsets and the base can join in a conference call with the outside caller.
♦♦To join a call that’s already in progress, just press Talk/flash on the handset.
♦♦To leave the conference call, hang up normally; the other stations remain connected to the call.
Call Transfer
To... | Press... | |
| Intercom/clear. The phone puts the call on hold and | |
transfer a call | prompts you to select the handset you want to page. | |
When the other handset accepts the call, you'll be | ||
| ||
| disconnected (press Talk/flash to rejoin the call). | |
cancel a transfer | Talk/flash to return to the call. | |
accept a | Intercom/clear to answer the page and speak to the other | |
transferred call | handset. Then, press Talk/flash to speak to the caller. |
English - 10
