Uniden D1685 Accessing the Answering System, Getting Your Messages, From the base From a handset

To...	Follow these steps from the base or a handset:
	1.	Open the menu with the phone in standby. Select Ans. Setup,
		then select Record Greeting.
Record a	2.	Press MENU/SELECT to start recording. Wait until the system says
		"Record greeting" before speaking.
personal
	3.	Press Menu/Select to stop recording. The system plays back your
greeting
		new greeting.
	4.	To keep the greeting, press PLAY/STOP on the base or press End
		on the handset. To re-record it, press Menu/select.
Switch	1.	Open the menu with the phone in standby. Select Ans. Setup,
		then Greeting Options.
between
	2.	The system plays back the current greeting. Press Menu/select to
greetings
		switch greetings.
Delete your	Switch to your personal greeting; press delete on the base or
greeting	Intercom/clear on the handset while the greeting is playing.

Accessing the Answering System

With the phone in standby,		Press MESSAGE/MUTE to start
you can access the system		remote operation mode.
from the base or remotely	Use PHONEBOOK to	5:Stop		Use CID to go to
from any handset:	go back to the	[ /	/select]	the next option:
♦♦Only 1 station can access	previous option:
	4:Delete			1:Repeat
the system at a time.	3:Skip			Press MENU/SELECT
♦♦During remote access:
	2:Play			to choose the
––If you do nothing for				current option
				OR
30 seconds, the phone				END to exit remote

returns to standby. operation mode.

––The phone beeps so you

know it's waiting for the next command.

––You can press the number key shown next to each command instead of scrolling through the screens.

Getting Your Messages

To...	From the base	From a handset
play new	Press Play/stop.	Press Message/mute.
	The system announces the number of new & old messages,
messages	then plays each new message (followed by the day and time if
	set) in the order it was received.
restart this	Wait 5 seconds after the message begins, then
message	press Phonebook.	select 1:Repeat.

English - 16