Adapter and Battery Infor- mation

AC Adapter (Base and Charger)

Part number

PS-0035

Input voltage

120V AC, 60 Hz

Output voltage

8V AC @ 300mA

xxUse only the supplied AC adapters.

xxUse the proper adapter for the base & any chargers.

xxDo not place the unit in direct sunlight or subject it to high temperatures.

Battery pack (with normal use)

Part number

BT-1021

Capacity

300mAh, 2.4V DC

Talk time

about 7 hours

Standby time

about 7 days

Battery life

about 1 year

xxReplace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Depart- ment (see the front cover).

xxWhen the battery gets low, the handset beeps and shows a low battery alert; recharge the battery.

Rechargeable Battery Warning

xxThis equipment contains a rechargeable Nickel-Metal-Hydride (Ni-MH) battery. xxNickel is a chemical known to the state of

California to cause cancer. xxDo not short-circuit the battery.

xxThe batteries in this equipment may explode if disposed of in a fire.

xxDo not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may dam- age the battery or cause it to explode.

xxAs part of our commitment to protecting our environment and conserving natural resources, Uniden voluntarily participates in an RBRC® industry

program to collect and recycle used Ni-MH

batteries within the United States. Please call 1-800-8-BATTERY for information on Ni- MH battery recycling in your area. (RBRC® is a

registered trademark of the Rechargeable Battery Recycling Corporation.)

Rechargeable batteries must be recycled or disposed of properly.

Warning! The cords on this product and/or accessories contain lead,

a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.

Uniden works to reduce lead content in our products & accessories.

Compliance Information

FCC Part 68 Information

This equipment complies with Part 68 of the FCC rules and the requirements ad- opted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company.

An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant tele- phone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

English - 21

Page 21
Image 21
Uniden D1685 manual Adapter and Battery Infor- mation, FCC Part 68 Information, Rechargeable Battery Warning