Uniden DRX100 Conference Calling, Call Transfer Press, Privacy Mode, Handset to Handset Intercom

•If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 16, or see the accessory handset manual.

Conference Calling

•When an outside call comes in, two handsets can join in a conference call with the outside caller.

•To join a call that’s already in progress, just press Talk/flash or Speaker.

•To leave the conference call, hang up normally; the other handset remains connected to the call.

Call Transfer

To...	Press...
	Intercom/clear. The phone puts the call on hold and
transfer a call	prompts you to select the handset you want to page.
	When the other handset accepts the call, you'll be
	disconnected (press Talk/flash to rejoin the call).
cancel a transfer	Talk/flash to return to the call.
accept a	Intercom/clear to answer the page and speak to the other
transferred call	handset. Then, press Talk/flash to speak to the caller.

Privacy Mode

To activate privacy mode on a call in progress, press Menu/select twice. As long as privacy mode is on, you'll see a in the display, and no other handsets can join your call. Privacy mode turns off automatically when you hang up; you can also turn it off by pressing Menu/select twice.

Handset to Handset Intercom

•Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line.

•You can make an intercom call from any handset, but only two handsets can be in an intercom call at any time.

•If an outside call comes in during an intercom page, the phone cancels the page so you can answer the incoming call.

•If an outside call comes in during an intercom call, press Talk/flash to hang up the intercom call and answer the outside call.

To...	Press...
make an intercom	Intercom/clear. Select the handset you want to talk
page	with, or All to page all handsets at the same time.

12