To... | Press... |
cancel a page | End. |
answer a page | Intercom/clear or Talk/flash. |
end an intercom call | End. Both handsets return to standby. |
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you can save that code number to a phonebook entry and use the phonebook to send the code number.
1.Enter the code number (up to 20 digits) into the phonebook just like a regular phonebook entry. Be sure to enter the code number into the phonebook exactly as you would enter it during a call.
2.When you hear the prompt that tells you to enter the number, open the phonebook and find the entry that contains your code number.
3.Press Menu/select to send the code. If you change your mind, just close the phonebook.
Voice Message Notification
If you subscribe to a voice mail service, your phone displays the voice
mail icon ( 
) when you have a new message. This feature supports
After you listen to your messages, the message icon turns off. If it doesn’t, you can reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.
Setting Up Voice Mail Access
If you have voice mail access through your service provider, you can program that access number into your phone and then just press one key to dial - Message/Mute. You will set up an access code to your account, and you can either enter that manually after you have accessed the voice mail or you can program that into your phone, too.
1.Press Message/Mute. If no voice mail access number has been set up, the system prompts you to do that now.
2.Enter the provider’s voice mail access number. Press Menu/Select to set the number.
3.The screen displays DONE!
13
