Adapter and Battery Information
AC adapter
Part number | |
Input voltage | 120V AC, 60 Hz |
Output voltage | 8V AC @ 300mA |
xxUse only the supplied AC adapters.
xxUse the proper adapter for the base & any chargers.
xxDo not place the unit in direct sunlight or subject it to high temperatures.
Battery pack (with normal use)
Part number | |
Capacity | 300mAh, 2.4V DC |
Talk time | about 7 hours |
Standby time | about 7 days |
Battery life | about 1 year |
xxReplace the battery when the talk or standby time becomes noticeably re- duced. For replacements, call the Parts Department (see the front cover).
xxWhen the battery gets low, the handset beeps and shows a low battery alert; put the handset in the cradle for recharging.
Rechargeable Battery Warning
xxThis equipment contains a recharge- able
xxNickel is a chemical known to the state of California to cause cancer.
xxDo not
xxThe batteries in this equipment may explode if disposed of in a fire.
xxDo not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode.
20
xxAs part of our commitment to protecting our environ-
ment and conserving natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and
recycle used
Rechargeable batteries must be recycled or disposed of properly.
Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.
Uniden works to reduce lead content in our products & accessories.
Compliance Information
FCC Part 68 Information
This equipment complies with Part
68 of the FCC rules and the require- ments adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information,
a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company.
An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to
