Uniden D1780-2 manual Assigning a Speed Dial Number, Finding a Lost Handset

To...	Using the	Using the
	earpiece	speakerphone
mute the microphone during	press Message/mute (press again to turn the
a call	microphone back on).
put a call on hold	press Intercom/clear*.
return to a call on hold	press Talk/flash.	press Speaker.
	press and hold the speed dial number
	for 1.5 seconds. After you verify that the
make a speed dial call	system is displaying the correct phonebook
	data for that speed dial number, press TALK/
	FLASH or SPEAKER on the handset.

* After 5 minutes on hold, the call will be disconnected.

Assigning a Speed Dial Number

You can assign a speed dial number to a phonebook entry when you create that entry for the first time or when you edit it. Press PHONEBOOK and select Create New. As you enter the phonebook number, one of the options you will see is to assign a speed dial number to that phonebook entry. You can assign up to 10 speed dials, 0 - 9.

Finding a Lost Handset

With the phone in standby, press Find HS on the base. All handsets beep for 1 minute; to cancel, press Find HS again or press any handset key.

Changing the Volume

To change the...	When...	Press...
earpiece or speaker	you are listening to that	Up to increase
volume for each handset	earpiece or speaker (playing	the volume.
base speaker volume	messages, etc.)
		Down to
ringer volume for each	the phone is in standby
		decrease it.
handset or the base*

* If you turn the ringer all the way down, that particular ringer turns off.

Using the Caller ID and Redial Lists

Caller ID (CID) is a service available from your telephone provider that shows the phone number (and sometimes the caller’s name) of incoming calls. Contact your telephone provider for more information.

English - 9