Uniden DCX100 Register the Handset, On the handset you want to register, On your original base

• Use only the Uniden battery supplied with your phone.

• Recharge your handset on a regular basis by returning the handset to the charger after each phone call.

Step 3: Register the Handset

YOU NEED TO REGISTER THE DCX100 TO THE MAIN BASE BEFORE USE!

For Main Base Models DECT1060/DECT1060-2/DECT1080/ DECT1080-2. When you register a new handset to your base, you will be asked to enter the base PIN code. The pre-set PIN code is 0000. If you wish, you can change this code, see owner's manual for detailed instruction. Before registering, make sure that you have the base and handset in front of you. Also, make sure all handsets and the base are in standby mode.

On the handset you want to register:

1Press to access the main menu.

2Press up or down key until “Add.Settings” is displayed and

press .

Press or to display “Register” and press .

Press or to select your base number and press .

On your original base:

Press and hold Find HS for approx. 3 seconds. You are now in ‘registration mode’.

If the base already has the maximum number of handsets (6) registered to it, you will need to de-register one of the existing handsets before you can register the new handset.

See the section on the next page for de-registering handsets.

[4]