Registering the Handset
You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.)
To register to a DECT2000 series base, place the accessory handset in the base. While the handset is registering,
HANDSET REGISTERING appears in the LCD. When REGISTRATION COMPLETE is displayed, the handset has been registered to the base.
If REGISTRATION FAILED appears, pick up the handset from the base and try again.
1
Extra Handset | Charge the handset |
Charger | for |
|
2 | Extra Handset |
|
|
| |
Place the extra handset |
| |
in the main base to |
| |
register. | Main Base | |
|
| |
| Registration | 4 |
| Complete . |
|
| Base #1 |
|
| Extra Handset |
|
3 | Main+Base | Charger |
| ||
Resetting the Handset
If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.
) Press and hold [
] and [#] for at least five seconds, until the SYSTEM RESET menu appears.
2)Select the DEREGISTER HS submenu by pressing [Menu/Select]. WHICH HANDSET? appears in the display.
*CPFUGV9JKEJ *CPFUGV! *CPFUGV
3) | Use [ | ] or [ ] to select the handset ID to be |
| from the list, and then press [Menu/Select]. DEREGISTER | |
| HS appears. | |
4) | Press [ | ] to move the cursor to YES, and then press |
[Menu/Select]. You will hear a confirmation tone.
