Software information
This menu gives you information on the Digital Terrestrial Receiver, including the model type and current software version.
Software upgrade
Software upgrade is used to display the current software version.
In order to maintain advantages of software improvements we are carrying out, please check regularly on the DTG web site, (http://www.dtg. org.uk/industry/download_schedule.php) in the “Freeview downloads” tables, for the availability of a new software version for the Philips DTR7510/05 digital terrestrial recorder.
If there is a new software version broadcast, please follow the instructions:
Press red colored button to check if an update is available. It will take few minutes.
If a new version is found, press OK to install it. Press OK to confirm.
When update is finished, it will reboot the box.
Factory reset
Factory Reset is used to restart the Digital Terrestrial Receiver in its initial state: it is protected by code (default 0000)
Reset & restart: you lose all data and information previously stored, and you have to restart first installation.
All recordings on hard drive are deleted !!
Conditional access
The Conditional access
5.9.4Smart Card
Once you are in the Settings menu, select Smart Card using the 
/ 
arrow keys. Press OK.
This menu provides you access to the following options:
•System info
•Operator
•Maturity
•PIN code
System info: displays card system info
Operator: displays card operators info
Maturity: provides information about maturity level
PIN code: use it to change the card PIN code
38 | Use more of your Digital Terrestrial Receiver |
