Use the 
/ 
arrow keys to highlight
Installation.
Press OK.
Use the 
/ 
arrow keys to highlight Full installation.
Press OK.
On screen Scan mode selection, select
Scan type fast.
Note
If the number of TV/Radio stays at 0 value, refer to chapter 10 Frequently asked questions. You could try again from this step, choosing Scan type automatic, or advanced but it could take more than 30 minutes.
If the problem remains, contact your dealer.
12
Screen Scan mode selection:
Press OK.
The scan process displays channels found with signal level and quality. of all sources analysed
Note
If signal level stays low and red, during the full scan operation, check the cables.
If Power seems ok but Quality indicator stays low and red, check the availability of digital signals in your area. If you are supposed to have access to digital signal, check your aerial installation.
If some local variant exist, these extra channels will start with number 800.
When the scan is finished, your Digital Terrestrial Receiver display again the screen of scan mode selection. Press Exit
Enjoy your Digital Terrestrial Receiver.
Getting started
