3.2Connect
Danger
Risk of electric shock!
Make sure all the devices are disconnected from the mains before making any connections.
SCART connection
Use this connection if your TV set is not fitted with a HDMI input.
Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver.
Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the RF input of your TV set using a RF cable. Connect the supplied scart cable to the scart input of the TV set and to the TV scart socket at the rear of the Digital Terrestrial Receiver.
Plug your TV set to the mains. Do not plug your Digital Terrestrial Receiver yet!
Note
The fan extracts hot air from the device: Check that there is enough place and fresh air around the device to avoid overheating.
HDMI connection
Use this connection if your TV set is fitted with a HDMI input.
Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver.
Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the RF input of your TV set using a RF cable. Connect a HDMI cable to the HDMI input of the TV set and HDMI socket at the rear of the Digital Terrestrial Receiver.
Plug your TV set to the mains. Do not plug your Digital Terrestrial Receiver yet!
Note
The HDMI cable is not supplied
3.3Install
Before you start installation, make sure you have made all the required connections.
Switch on your TV set and select the correct source (refer to the user manual of yourTV set).
Note
The display format being managed by the Digital Terrestrial Receiver, set your TV to “full screen” or to the similar equivalent setting.
Plug the power cord into the mains and set the switch at the rear of the Digital Terrestrial Receiver to position ON.
10 | Getting started |
