![](/images/new-backgrounds/1211102/2111029x1.webp)
Registering the Handset
You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.)
For DCT75 Series Bases (DCT756, DCT7565, DCT758, DCT7585)
To register to a DCT75 series base, place the accessory handset in the base. While the handset is registering,
HANDSET REGISTERING appears in the LCD. When
REGISTRATION COMPLETE is displayed, the handset has been registered to the base.
If REGISTRATION FAILED appears, remove the handset from the base and try again.
For Other Base Models
1. Select your base model from the list and follow the directions:
MODEL | DIRECTIONS: | |
DCT646 | Disconnect the base AC adapter. Press and hold | |
DCT746 | [find handset] while you reconnect the adapter. | |
DCT6465 | Disconnect the base AC adapter. Press and hold | |
DCT6485 | [intercom] while you reconnect the adapter. | |
DCT648 | Disconnect the base AC adapter. Press and hold | |
[intercom/find handset] while you reconnect the adapter. | ||
| ||
DCT748 | Disconnect the base AC adapter. Press and hold | |
[find hs/ ] while you reconnect the adapter. | ||
| ||
DCT7488 | Press the MENU soft key. Scroll down to HS | |
REGISTRATION and press the OK soft key. | ||
| ||
DMX776 | Press and hold the registration button on the bottom of the | |
DMX778 | base until the base LEDs start blinking. |
4