2.On the handset, press and hold [#/→] until you hear a beep and see HANDSET REGISTERING in the display.
3.When REGISTRATION COMPLETE is displayed, the handset has been registered to the base. If REGISTRATION FAILED appears, please try these steps again.
Resetting the Handset
If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.
1. Press and hold [
] and [#/>] for at least 5 seconds, until the SYSTEM RESET menu appears.
2.Select the DEREGISTER
HS submenu by pressing [select/ 
]. WHICH HANDSET? appears in the display.
3.Use [ 
] or [ 
] to select the handset ID to be de- registered from the list, and then press [select/ 
]. DEREGISTER HS appears.
4.Press [ 
] to move the cursor to YES, and then press [select/
]. You will hear a confirmation tone.
Resetting the Handset Without the Base
If the original base this handset was registered to is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base.
1.Press and hold [
] and [#/>] for more than 5 seconds.
2.Press [ 
] to move the cursor to REPLACING BASE and then press [select/
]. REPLACE BASE appears.
3.Press [ 
] to move the cursor to YES, and then press [select/ 
]. You hear a confirmation tone, and the handset deletes its own link to the base without trying to contact the base.
4.Register the handset to the new base.
5
