Uniden DECT2060 manual Using Multiple Bases, Registering DCX200 Accessory Handsets

Models: DECT2060

1 56
Download 56 pages 52.6 Kb
Page 21
Image 21

Registering DCX200 Accessory Handsets

If you purchase an accessory handset, you need to register the handset before use. Handset(s) supplied in the box with the base are pre-registered at the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have not been registered display:

*CPFUGV  PQV VQ  TGIKUVGT  TGIKUVGTGF  RNCEG 5GG  [QWT  1YPGT U

JCPFUGV  QP  DCUG /CPWCN  HQT  JGNR 

To register an accessory handset:

) Charge the handset for 15-20 hours.

2)Place the handset in the main telephone base cradle to initiate registration. HANDSET REGISTERING will appear in the LCD.

3)Wait approximately thirty seconds, "REGISTRATION COMPLETE" will be displayed to indicate the handset has been registered to the base and a handset ID will be automatically assigned.

If REGISTRATION FAILED appears in the LCD, please try these steps again.

Note: If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base. See Resetting the Handset on page 42.

Using Multiple Bases

DCX200 handsets and the handsets supplied with your phone can be registered to a total of four different DECT2060 or DECT2080 bases. Once your handset is registered to more than one base, you can set the handset to search automatically the available base, or you can select manually which base the handset should connect to (for example, if you have one base with an answering machine, you can tell the handset to connect that base to check messages).

20

Page 21
Image 21
Uniden DECT2060 manual Using Multiple Bases, Registering DCX200 Accessory Handsets