Uniden DECT2080 manual Expanding Your Phone, Adding Accessory Handsets, Compatible Handsets

Expanding Your Phone

Adding Accessory Handsets

Your phone supports a total of six cordless handsets. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. All the handsets ring when a call is received.

Compatible Handsets

Your phone is compatible with the DCX200, DWX207 and DCX300 accessory handsets. If you purchased an accessory handset separately, you must register the handset to the base before use. Accessory handsets will not operate until they are registered.

Charging Accessory Handsets

The handset’s battery recharges automatically when the handset is placed in the charger.

) Use the AC adapter that was supplied with your handset to connect the DC IN 9V jack to a standard 120V AC outlet.

2)Set the charger on a desk or tabletop, and place the handset in the charger with the LCD screen facing forward.

3)Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts.

4)Charge the handset battery pack for at least 15-20 hours before using your new handset for the first time.

Route the cord.

To AC outlet To DC IN 9V

AC adapter (supplied)

Caution: Use only the AC adapter supplied with the accessory handset.

19