Tone Dialing Switch Over
If your phone is set to pulse dialing, you can temporarily switch to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press [*/tone] on the handset. Any digits you enter from then on will be sent with tone dialing. When this particular call ends, the phone automatically returns to pulse dialing.
See Changing the Dial Mode on page 15 for instructions on setting your phone for pulse or tone dialing.
Line Mode Setup (Base only)
The Line Mode Setup feature is only used in instances where you have multiple phones where users may pick up an extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting that an extension phone is picked up will you ever need to change this feature. There are three settings for this feature:
) If you have multiple bases, select the base you need to change the setting (see page 21).
2)Press [Menu/Select]. Select the GLOBAL SETUP menu, and then the SET LINE MODE submenu.
3)IF INSTRUCTED BY CUSTOMER SERVICE PRESS [SELECT] appears. Press [Menu/Select].
4)Move the cursor to select TYPE - A, TYPE - B, or OFF.
5)Press [Menu/Select]. You will hear a confirmation tone.
Installing the Optional Headset
Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for
37
