Expanding Your Phone
Selecting the Base
When your handset is registered to another base, it will automatically connect to the base. A base ID (that is for the handset only) will be assigned in the order of registration. You can either select a base you want to use manually, or set to AUTO. If you set to AUTO, when the handset comes out of range, it searches automatically the available base in order of base ID.
) With the phone in standby, press [Menu/Select]. Select the HANDSET SETUP menu, and then the SELECT BASE submenu.
2)Move the cursor to select the base you want to connect to, or choose AUTO to have the handset automatically select the base.
3)Press [Menu/Select]. SEARCHING will appear in the display.
4)When the base is found, the handset will return to standby. If the base is not found, “SEARCHING” continues to appear. You can repeat the procedure listed above to return back to the original connection or to find the different base.
Notes: • You cannot change bases during a call.
•To confirm which bases the handset is registered to, open the SELECT BASE submenu and use [
] and . [
] to scroll through the list. Press [
] to close the list and return to standby.
25
